To print this article, click on the printer icon below. Then, use the print function in your browser.



Industry Newsline


Dosatron International has named Peter Temko general manager for Dosatron. Temko will be responsible for implementation and alignment of general operations, sales, marketing, distribution, personnel, general administration, and future growth strategies. Temko has been with Dosatron for four years as financial controller and was previously employed with Oracle Corporation. He has an MBA degree from Georgia Southern University and works out of the company's Clearwater, FL Headquarters.

Lock America of Garden Grove, CA, has announced the promotion of Grady Carlson to national sales manager. Carlson joined Lock America in 2000 as an outside sales representative, moved up to western sales manager, and now will have responsibility for sales of Lock America's coin-op, gaming, self-storage, and vending security products for all of the US.

Bill Baker has joined D & S Manufacturing as its new west district manager based in Los Angeles. Baker will be responsible for all sales and service activities of D & S equipment on the West Coast as well as Montana, Idaho, Nevada, Utah, and Arizona. He will also oversee the development of D & S west distributors. Baker, an industry veteran of over eight years, was most recently with N/S Wash Systems where he was directly involved in over 500 car and bus wash installations.


Lakeland, FL-based Con-Serv Manufacturing has named its new distributor for "the land down under" - Carlover's Limited of Australia. Carlover's Limited was to receive its first water recovery and spot free rinse systems in mid July 2004. John Sewerle, national operations manager of Carlover's Limited, attended the Car Care World Expo in April and chose Con-Serv's equipment to serve Australia. Con-Serv worked closely with Carlover's to accommodate electrical, environmental, and various code requirements necessary to be successful in Australia.

Con-Serv Manufacturing has gained access to over nine countries within the last year. Jim Keller, the company's president, has been working closely with international distributors to understand those markets and meet their needs. Within the last four months alone, Con-Serv has added Saudi Arabia, Cayman Islands, and Kuwait to its list.


IDX has begun to upgrade its manufacturing assembly lines with the addition of an automated surface mount system. This will increase productivity and keep costs down without sending jobs overseas. The first products off the new assembly line in late September, 2004 will be new models of IDX coin XEPTOR(r) - X20 series for the casino and vending OEM and MA820 series for the car wash and arcade OEM.


In a symbolic gesture, WashUSA event spokesperson and founder Mark Curtis recently presented Make-A-Wish Account Manager Kristin Keck with a check for $232,760 in New York City for the 2003 fundraiser. Keck has been the fundraiser's Make-A-Wish contact since the event began. Curtis attributes much of the event's success to her hard work and dedication.

"We are so thankful for all the efforts made by operators and vendors alike to make this wonderful donation," Curtis said. "We look forward to presenting an ever-growing check annually as more and more of our industry rallies to support the WashUSA effort."

The WashUSA committee is presently shoring up its 2004 vendor sponsors for its 2004 fund-raiser slated for September 18. There are varying levels of commitment available to suppliers, in addition to the four founding sponsorships, to help underwrite the costs involved in marketing this effort. In this regard, WashUSA recently announced that Pur-Clean & Pur-Water Division, North Highland, CA had joined the September 18 fundraiser as a Gold Sponsor. It further announced that the Jim Coleman Company of Houston, TX had agreed to produce at cost the signage needed for the 2004 WashUSA event and to ship it to all participants. In addition, the Midwest Carwash Association (MCA) promised the effort a huge shot in the arm by undertaking to again match whatever its membership contributes to the fundraiser.

For more information on participation and sponsorship opportunities, contact Curtis at (888) WASHUSA or Suzanne Stansbury at (518) 877-6779 or e-mail her at: or visit on the web.


Kleen-Rite Corp., located in Columbia, PA, will be hosting the first annual "Learn More, Earn More" Informational Expo & Training Seminar on Wednesday, November 10, 2004.

The goal of this full day seminar is to give car wash operators the opportunity to increase their knowledge of the car wash industry by meeting and talking one-on-one with leading manufacturers and vendors in the industry and by attending any of the informational seminars and forum discussions.

Participating vendors include CAT Pumps, Fragramatics, Laurel Metals, Paloma, Simoniz, Hamilton Mfg., GinSan, Meguiar's, JBS, CarFreshner, J.E. Adams, Hypro, General Pump, Hamel Mfg., Dema, Medo, J-KO, Dixmor, Mosmatic, Ideal Shield, Giant Industries, Disken Systems, Flojet, Rain Tunnel, Armor All, Champion, Quick Dry, Trans-Mate, and National Automotive Chemical.

Doors will be open from 9:00 a.m. to 5:00 p.m. Door prizes and raffles will be going on throughout the day. A continental breakfast and buffet lunch will be provided for all.

The event is totally free to anyone wishing to attend. Registration forms and information packets can be obtained by calling Kleen-Rite Corp. at (800) 233-3873 or by visiting on the web.


Hanna Car Wash Systems International honored its top-selling distributors during Hanna's sales meeting at the 2004 Car Care World Expo in Las Vegas. Eight Hanna distributor organizations received the prestigious President's Gold Award based on 2003 sales.

Hanna's president and CEO Jim Perris presented the award to the following Hanna distributor organizations:

  • Howco, Charlotte, NC
  • R.H.D. Car Wash Sales & Service, Largo, FL
  • Wash Solutions, Dallas, TX
  • A.E. Styles, Point Pleasant Beach, NJ
  • Autowash Maintenance, Maiden, MA\
  • Hanna Carwash Vertriebs GmbH, Norderstedt, Germany
  • Northwest Pump, Portland, OR
  • Autowash Development Associates & Steve's CarWash Services, San Jose, CA


Spraying Systems Co. expanded the functionality of iSpray(tm), its online, interactive tool on iSpray helps guide users quickly and efficiently through the selection process for spray nozzles and accessories and allows credit card ordering.

Users new to nozzles will find valuable information about various spray nozzle types and several built-in tools to help determine which nozzles and accessories are suitable for their application. Experienced users looking for replacement items will find part number and part description searches helpful and easy to use. Once the appropriate nozzles are identified, users can place orders using VISA(r), MasterCard(r) or American Express(r).

Complete technical information is also available on iSpray. Product photos, drawings, and detailed
specifications are available to users by simply clicking on a "View" button at any time during the selection process. iSpray can be accessed directly at or via

AUTO LAUNDRY NEWS is published by EW Williams Publications Company
2125 Center Avenue, Suite 305, Fort Lee, NJ 07024-5898, USA Phone: 1-201- 592-7007 Fax: 1-201-592-7171